Solid State Laser Repair Service
If your laser is malfunctioning, do not despair.
We will be glad to help you and provide you with a high-quality laser module for replacement.
We don’t care if you are a large or a small company.
We are happy to offer our services to any customer.
Minilablaser.com is one of the largest suppliers of laser modules to major service companies in Europe, America and Asia.
Years ago, we were the first to change the way the laser was repaired and uncovered its secret.
Our company offered laser repair by simply replacing the faulty laser module with a new one right at the customer’s place.
Before that, all customers had to send the entire laser unit to a service center on the other side of the world and shut down the lab indefinitely.
Now everything can be done right where the lab is located.
You or your service engineer can replace the laser module right there.
It should also be emphasized that our company has developed its own way of repairing lasers using the most advanced SLD laser modules. This guarantees a long life and high stability of the laser module.
We can repair any laser with any problem of the following minilabs:
REPAIR SERVICE
Any Noritsu minilabs equipped with Solid State Lasers (SSL) can be upgraded from DPSS to SLD level.
Or you can order a repair of your DPSS laser module.
QSS 30 series
QSS 31 series
QSS 32 series
QSS 33 series
QSS 34 series
QSS 35 series
QSS 37 series
QSS 38 series
LPS24PRO
LASER MODULES
HK9755-03 BLUE
HK9755-04 GREEN
HK9155-01 BLUE
HK9155-02 GREEN
HK9356-01 BLUE
HK9356-02 GREEN
REPAIR SERVICE
Any FUJIFILM minilab equipped with Solid State Lasers (SSL) can be upgraded from DPSS to SLD level.
Or you can order a repair of your DPSS laser module.
APPLICABLE MODELS
FRONTIER 330
FRONTIER 340
FRONTIER 350
FRONTIER 370
FRONTIER 390
FRONTIER 355
FRONTIER 375
FRONTIER LP 7100
FRONTIER LP 7200
FRONTIER LP 7500
FRONTIER LP 7600
FRONTIER LP 7700
FRONTIER LP 7900
FRONTIER LP5000
FRONTIER LP5500
FRONTIER LP5700
SOLID STATE LASERS
Any AGFA minilab equipped with Solid State Lasers (SSL) can be upgraded from DPSS to SLD level.
Or you can order a repair of your DPSS laser module.
We also offer our custom made new diode lasers for all AGFA minilabs.
APPLICABLE MODELS
d-lab.2 select
d-lab.2 basic
d-lab.2 (70mm)
d-lab.2plus select
d-lab.2plus basic
d-lab.2plus (70mm)
Netlab.2plus basic
LASER MODULES
HK9155-04 BLUE
HK9155-05 GREEN
GAS LASERS
Any AGFA minilab equipped with Gas Laser can be repaired with a replacement of all exhausted components to the new ones. After repair works laser will have a new, original tube, a cable, a board and a fan.
SOLID STATE LASERS
Any Durst minilab equipped with Solid State Lasers (SSL) can be upgraded from DPSS to SLD level.
Or you can order a repair of your DPSS laser module.
We also offer our custom made new diode lasers for all Durst minilabs.
APPLICABLE MODELS
Durst Theta 51
Laser head Shimadzu Blue HK-9057-03
Laser head Shimadzu Green HK-9057-04
or
Laser head Shimadzu GreenHK9755-03
Durst Lambda 131
Laser head Shimadzu Blue HK9255-02
Laser head Shimadzu Green HK9255-03
GAS LASERS
Any Durst minilab equipped with Gas Laser can be repaired with a replacement of all exhausted components to the new ones. After repair works laser will have a new, original tube, a cable, a board
LASER UNIT
Air-Cooled Argon-Ion
WHAT WE DO:
Here is a list of all the procedures we normally perform to upgrade a customer’s original DPSS laser module to an SLD laser module:
1. Inspection for damage to all external components (housing, circuit board, cable, connector, etc.) and thoroughly clean the laser module before opening it.
2. Replacement of all internal optical elements with new ones of the best performance.
3. Removal of all obsolete original components from the laser module to replace them with new and modern parts made especially for us.
4. Installation of two new additional control circuit boards inside the laser module.
5. On certain types of modules, we perform all necessary operations on the laser module’s EEPROM (data reprogramming) to clear all errors and restore the original data for best performance.
6. We run the laser module to adjust it so that it meets or even exceeds the original specifications:
6.1 Adjusting the output optical power.
6.2 Aligning the beam position (we use a special “optical table” with “smart” targets).
6.3 Beam quality adjustment.
6.4 Adjusting the beam focus.
7. Run the Laser Non-Stop Test for 24 hours to observe the stability of all output values.
If the test shows no significant discrepancies in the specified parameters, prepare the laser for shipment:
7.1 Record all the data of each laser module in our Registry.
7.2 Print out the warranty card.
7.3 Pack the module.
8. Call delivery guy.
9. Send the tracking number to the customer.
Here you can see the visual difference in two different designs: DPSS and SLD.
Our SLD module consists of a few elements:
– Laser diode Mount
– Internal Optical unit
– Integrated Laser driver
The small numbers of components reduce the risk to have components defective.
Such way we receive a long lifetime of our SLD module.
REPAIR SERVICE
