FULL CONTROL
of a lab without a scanner
In 2005 the Frontier Manager Printer Controller (the FMP Controller or FMPC for short) was introduced on the market.
The FMP Controller can process print data from a digital camera and from a film simultaneously to reduce the printer non-operating time and the operator’s waiting time for increased work efficiency, thereby increasing the processing capability of Digital Minilab Frontier.
Equipment
Frontier 350/355 LP1500SC
Frontier 370/375 LP2000SC
Frontier 390 LP2500
Frontier 550 LP5500
Frontier 570 LP5700
1. To install the system, it is necessary to have a PC ready in addition to the FMPC kit.
The FMP Controller software and some of the hardware contained in the kit should be installed onto the PC.
2. When necessary in the user’s work environment, the PC for the FMP Controller and the monitor,
mouse, and keyboard for the main control of SP1500/2000/3000 can be shared by furnishing a monitor selector. The sharing of the monitor, mouse, and keyboard enables the operator to perform various FRONTIER and FMP Controller work screen operations on the single SP1500/2000/3000 monitor screen by simple switching operations.
3. We recommend using an extra PC with its own monitor, keyboard, and mouse. PC Requirements will be provided along with the FMPC kit.
Frontier 350/370
FMPC Kit Content
– FMP Controller Software
– EPROM v.2.0 (for CTL PCB)
– IEEE 1394 Board/Firewire PCB [Special revision 2.0]
– Installation Manual
550,00 €
*- FMP Controller Software depends on your choice (D20/MS/FE).
– FMP Controller Software *
– EPROM v.2.0 (for CTL PCB)
– IEEE 1394 Board/Firewire PCB [Special revision 2.0]
– Installation Manual
550,00 €
*- FMP Controller Software depends on your choice (D20/MS/FE).
– FMP Controller Software *
– EPROM v.2.0 (for CTL PCB)
– IEEE 1394 Board/Firewire PCB [Special revision 2.0]
– Installation Manual
550,00 €
*- FMP Controller Software depends on your choice (D20/MS/FE).
– FMP Controller Software
– EPROM – not required
– IEEE 1394 Board/Firewire PCB – not required
– Installation Manual
350,00 €
Start conversion!
You can order the FMPC Kit by email
if you cannot pay us by Paypal or by credit cards.
Please send us:
– the model of your minilab
– the model of the connected scanner
– the version of EPROM (see CTL PCB please)
– billing address
– shipping address
– the preferable way of payment